• Enter your email address to subscribe to this blog and receive notifications of new posts by email.

    Join 498 other subscribers
  • Admin

  • Monthly archive

Managing Calls with your Voyager Legend CS

This article is intended to help new Voyager Legend CS users manage calls from both your desk phone and your Mobile Bluetooth device that are occurring in random order in a busy office. It is assumed that you have already set up your Voyager Legend CS system, charged up the earpiece, connected the base to the desk phone, and Paired the earpiece to your Bluetooth mobile device (e.g. iPhone or Android cell phone). If you need some help doing this, please refer to the Voyager Legend CS User Guide  and the Voyager Legend CS Video Setup Guide for detailed setup instructions.

Earpiece Controls

Earpiece Controls

First Things First. Get familiar with the Controls and LED indicators on your system so you won’t be fumbling when you need to answer calls.

The most important button on the earpiece is the Call button (the phone handset symbol, located on the back end of the mic boom). This button enables you to answer and end calls and switch to a call coming in on the alternate device.

The Mute/Voice button located on the underside of the mic boom also useful in Muting calls and initiating voice commands.

Voyager Legend CS BASE LEDs

Voyager Legend CS BASE LEDs

Base LEDs

The centre LED tells you if your earpiece is powered on and paired to the Base. If the earpiece is powered off or if pairing between earpiece and Base is lost*, then the centre LED will be a dull red. It should be bright blue when powered and paired.

The left most Call/Mute LED is solid blue when the earpiece is “connected” to the Base and therefore ready to make or accept a desk phone call. Selecting the Call button on the earpiece will connect or disconnect it to the Base. If the Mute button is selected on the earpiece, then this LED will flash blue continuously.

* The earpiece may become “unpaired” from the base if you press the Pairing button on the back of the Base when they are already paired. More tips on this later, but if the center LED is not solid blue, and you can’t “connect” the earpiece to the Base, Pair the earpiece to base by selecting and holding the earpiece Call button until is says “Pairing”, then select the Base Pairing button.

Handset Lifters and EHS Cables

An HL10 Handset Lifter is an optional device that connects to a port on a wireless headset base, and attaches to your desk phone so that you don’t need to lift the handset manually when you answer calls. It will fit on a wide range of corded desk phones, but may have some limitations on certain models with a sharply curved side, or a steep angle on the face of the phone, or where the phone has a latch in the handset cradle that prevents the handset from lifting unless it is pushed up to first release it.  The HL10 activates automatically as soon as you “connect” the earpiece to the Base, and is useful for roaming away from your desk (up to 25-30 feet with the Bluetooth Voyager Legend CS, 300 feet with DECT devices such as the CS500 series wireless headset systems), remotely answering and ending calls from that range.

Some models of more advanced electronic phone systems such as Cisco and Avaya use an Electronic Hook Switch (EHS) cable to enable remote call control. This is also available as an option for the Voyager Legend CS.

Managing calls without Remote Call Control

If you will be at or near your desk when using the desk phone, then you can receive and end calls using the desk phone handset or call control buttons on the desk phone itself.

Ready for a Desk Phone Call

Ready for a Desk Phone Call

Be Ready for a Desk Phone Call

Put your earpiece on and select the Call button so that the Call LED on the Base is illuminated.

When a Call comes in, simply pick up the phone handset or select the Call Answer button on your phone if it supports this feature..



Active Desk Phone Call

Active Desk Phone Call

Answering Calls on your Cell Phone

Answering Cell Phone calls when the earpiece is mounted on the charge stand (not “connected ” to the Base), or when on your ear but not “connected” to the Base, is straight forward. But when the earpiece is “connected” to the Base (Base Call LED illuminated), it takes 2 or 3 steps to answer the Cell phone call.

When the Cell call initiates, you will hear a low level alert through the earpiece.

Put the desk phone caller on Hold through the desk phone function if available.

Select the Call button on the earpiece to “un-connect” the earpiece from the Base.

The incoming cell call alert in the earpiece will now grow louder.

Select the Call button again on the earpiece to answer the Cell call (or use voice commands to answer the Cell call).

When you are done with the Cell call, select the earpiece Call button to end the Cell connection, and select again to re-establish “connect” to the Base.

The desk phone call will still be active and you can resume that conversation.

Answering a Desk Phone Call when you are on an Active Cell Phone Call

In this case, when you Select the Call button on the Earpiece, it will disconnect the Cell Phone call. You must select the Call button again to “connect” to the base, then lift the phone handset or select the phone call button to answer the desk phone call. Unfortunately, there isn’t a way to put the Cell Phone call on Hold while you answer the desk phone call using the Voyager earpiece.


Call Management with Handset Lifter

Call Management with Handset Lifter

Operations using a Remote Call Control Device

If you are using an HL10 Handset Lifter or EHS cable, or have ShoreTel phones with direct EHS control through the communication cable,  where Remote Call Control is enabled, then multi-call operations are slightly different. When you select the Call button on the earpiece to “connect” to the Base, it will cause the handset to lift (or electronically put the desk phone “offhook”), and when you end the connection from the earpiece, it will hang up the phone. This will affect the way you manage desk phone calls when a second call comes in on the Cell Phone.

Other things you can do with your Voyager Legend CS

BT300 USB Bluetooth Adapter

BT300 USB Bluetooth Adapter

Connect to your Computer

The BT300 USB Bluetooth Adapter (see Voyager Legend CS accessories**) is a small dongle that plugs into a USB port on your PC or Laptop. It allows you to Pair your Voyager earpiece to the PC and one other device (either your Cell Phone or the Voyager Legend CS Base – you can’t have 3 devices Paired at the same time). This is practical if you want to use your Voyager earpiece to access PC applications such as VoIP, Podcasts or dictation software such as Dragon Speech.

** the BT300 comes in two models: the 85117-02BT300 Bluetooth USB Adapter for standard UC VoIP, and the 85117-01BT300-M Bluetooth USB Adapter for Microsoft Lync

Pairing your Earpiece with the BT300

Disable the Bluetooth connection on one of the devices (pull the power plug on the Voyager Legend CS Base, or Turn Off Bluetooth on your mobile device). The earpiece will alert you that one of these has been turned off.

Request Bluetooth Pairing on the earpiece (select and hold the Call button, or select the Mute/Voice button and Say “PAIR”).

Plug BT300 into a USB port on the Laptop/PC. It will flash at first, then show a Blue LED. The earpiece will provide an audible indication “PC connected”

You may have to go to the Control Panel on the PC to select the Audio Device to complete the setup.

You can return to the original configuration simply by unplugging the BT300 from the PC and re-enabling Bluetooth on the mobile device, or plugging in the power cord to be back of the CS Base. No need to re-Pair, it will be re-established immediately.

Using Different Earpieces

If several co-workers have their own Plantronics multi-point Bluetooth headsets (e.g. Voyager Pro, Voyager Legend etc), and they want to share the same Voyager CS Base, this is easily accomplished. Simply power off earpiece 1, set earpiece 2 in Pairing mode, and select the Pairing button on the back of the Voyager CS Base. This will allow you to share the CS desk phone functionality without having to share earpieces.

Stay tuned (or subscribe) for other user hints and trouble shooting notes. Or if you have questions, please contact us in the Calgary office at 403-239-8414, or email us at calgary(at)comfortcanada.com.


Bluetooth Headset Desk Phone Connection using the MDA 200

MDA200 and BT300 in Multipoint Setup

Multipoint Configuration

We’ve described in previous articles how the MDA 200 can allow you to switch your USB headset connection between a PC softphone and a desk phone. In this configuration, the Plantronics Voyager Bluetooth headset combined with the BT300 Bluetooth stub allows the headset to be linked to both the desk phone and the PC, while the multipoint capabilities of the Voyager headset allow it to also pair with your mobile phone.  The HL10 handset lifter connected from the MDA to the phone allows desk phone calls to be initiated and ended remotely without the need to manually pick up the handset.

Active Phone Call

Active Phone Call

The basic principle is illustrated to the left. A call may be initiated by selecting the Call Control (CC) button on the headset. This signals the MDA to lift the phone handset thus initiating or answering a call.  Calls can also be managed by selecting the PC or Phone buttons on the MDA. Selecting the phone button will cause the handset to lift as well as Linking the Bluetooth stub to the headset.

Here are some operational tips we noticed in testing this configuration:

MDA connected only to the Desk Phone (not the PC)

  • Both the PC and Phone LEDs will be off initially. Selecting the CC on the headset will activate the Link and pick up the phone handset
  • If the phone rings, the user is alerted by beeps in the headset, and the MDA phone LED will flash. You can answer  the call using the CC button or by selecting the MDA phone switch.
  • During an active call, selecting the headset CC button or the MDA phone button will end the call and hang up the phone handset.

MDA connected to both Desk Phone and PC

  • Initially the PC LED will be illuminated
  • Selecting the CC button on the headset will NOT activate the phone. It is signaling the PC softphone at this stage. This has relevance depending on the Softphone you are using, and whether you have the Plantronics control software loaded on your computer. (This topic is discussed in the MDA 200 user manual.
  • If the phone rings, the user is alerted and may engage the call using either the CC button or the MDA phone button.
  • The MDA reverts to PC mode when the desk phone call is ended.

The following table provides the LED indicators for various operational modes.


LED State Indication
 PC-Gr Solid green Connected to PC audio (default condition)
 PC-Gr Flashing green Incoming PC call
 PC-Yel Flashing yellow Active PC audio on hold
 Phn-Gr Flashing green Incoming desk phone call
 Phn-Gr Solid green Desk phone audio connected
 Phn-Yel Flashing yellow Active phone audio on hold
 PC_Phn-Gr Both icons flashing green for 2 seconds MDA200 is booting up – once complete both LEDs will be off if no headset is connected. If a headset is connected the PC icon will remain lit solid green.
 PC-Red Solid red Firmware update in process – follow firmware update instructions to clear once complete.
 Phn-Red Solid red Over current condition – using HL10 without power supply. Unplug MDA200, add power adapter, re-plug MDA200 to PC.
 Phn-Red Flashing red Headset fault – replace headset and power cycle the MDA200.

There are more setup and operational details in the MDA 200 user manual which can be found at the bottom of the MDA 200 product description page at this link.

For additional information on configuring the MDA 200 with the HL10, the BT300 and the Voyager Legend Bluetooth headset or Voyager Legend UC, please contact the Comfort Canada Calgary office at calgary@comfortcanada.com

Plantronics Voyager Legend Bluetooth System

Voyage Legend Bluetooth Headset

Voyage Legend Bluetooth Headset

Plantronics has introduced two new Bluetooth headset packages: the Voyager Legend and the Voyager Legend UC.  These replace the Voyager Pro Plus and the Voyager Pro UC B230, and include some improvements and feature enhancements that make Plantronics Voyager line even smarter than previous models.

Voyager Legend Earpiece

Voyager Legend Earpiece

The Voyager Legend is designed as a follow-up to the Plantronics Voyager Pro Plus, and the Legend does what many might have though was impossible, improve on an already stellar design. In fact, the Voyager Legend offers even better call quality, a smaller size, a more comfortable fit, and a longer battery life.


Voyager Legend UC

Voyager Legend UC

The Voyager Legend UC meets the demands of mobile professionals like never before. With connectivity to PC, smartphone, or tablet, sensors, precisely-tuned audio, voice controls and advanced charging accessories – it’s the only headset you need for your mobile life. It replaces the Voyager PRO UC and is available in two models:


– B235: UC Standard version built for UC applications and softphones from Avaya, Cisco, IBM, Skype, and more

– B235-M: Version optimized for Microsoft Lync 2010, and Microsoft OCS 2007

Voyager Legend UC Charging System

Voyager Legend UC Charging System

The Voyager Legend UC also comes with an innovative charging ecosystem which includes a carrying case to stow and charge the headset, providing up to 14 hours of additional talk time, a desktop charging stand and a modular wall charger



There is an excellent review of the Voyager Legend on CNET.com, but here are a few of the highlights and product improvements:

  • Dedicated Voice/Mute command button & On/Off slider switch
  • 25% smaller body size
  • Magnetic charging connectors for easier mounting
  • Sweat-proof coating (P2i) for improved durability
  • Innovative charging ecosystem:
    • A carrying case to stow and charge the headset, providing up to 14 hours of additional talk time *
    • A desktop charging stand *
    • A modular wall charger
  • Increased Talk Time up to 7 hours and 11 days Standby Time
  • Precision tuned triple-mic with enhanced DSP for superior noise cancellation
  • 3X improvement in wind noise reduction
  • Voice command menu and enhanced voice alerts including mobile call name announcement and “answer/ignore” call feature

* Optional accessory with Voyager Legend, included in package with Voyager Legend UC

The Voyager Legend is available now, and the Voyager Legend UC will be shipping in Canada toward the end of January, 2013.

For additional product formation, avilability and pricing on Plantronics wireless products, please visit our website at www.comfortcanada.com/Plantronics/plnt_wireless.htm or email us at calgary@comfortcanada.com